Avaya P460 Manager User Manual page 41

The Advanced tab of the LAG Configuration dialog box provides
information about the LAG's classification and spanning tree
configuration.
Avaya P460 Manager User Guide
Table 3-7. LAG Configuration Fields - General Tab (Continued)
Field
Auto Negotiation
Mode
Duplex Mode
Speed Mode
Flow Control Mode
Operational Status
Fault Messages
Description
The configured state of the Auto-Negotiation
protocol between two stations. When enabled,
Auto-Negotiation detects the highest common
denominator for communication between end
stations, and sets both to the same highest
common setting. It also delivers remote link
status.
For 10BaseT and 100BaseT ports,
Auto-Negotiation determines the speed and
Duplex Mode of communication between the
end stations. For Gigabit ports, Auto-
Negotiation determines the Flow Control
setting of the ports.
For more information, refer to Auto-Negotiation
in The Reference Guide.
The state of communication of the selected
LAG. Possible values are:
• Full Duplex - The LAG can send and
receive simultaneously.
• Half Duplex - The LAG can either
receive or send, but cannot do both
simultaneously.
The speed of communication of the ports in
the selected LAG. Possible values are:
• Ethernet - 10 Mbps.
• Fast Ethernet - 100 Mbps.
• Giga Ethernet - 1000 Mbps.
The state of flow control on the selected LAG.
The warning level of the LAG. Possible values
are:
• OK
• Warning
• Fatal
A list of fault messages.
Device Configuration
31