Avaya P460 Manager User Manual page 143

Field
Router ID
Sequence No.
LSA Age
Checksum
The parameters in the OSPF Link State Database window are read-only.
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
To view all the entries in the OSPF Link State Database:
Avaya P460 Manager User Guide
Table 15-12. OSPF Link State Database Window (Continued)
Description
Identifies the originating router in the
autonomous system.
The sequence number of the link state
advertisement. Use this parameter to detect old
and duplicate link state advertisements. The
larger the sequence number, the more recent
the advertisement. Note that the sequence
number is usually negative.
The age of the link state advertisement (in
seconds).
This parameter is a checksum of the complete
contents of the advertisement, not including the
Age value.
1. Click .
Or
Select Action > Start Point
Figure 15-15. OSPF Link State Database Start Point Dialog Box
2. Select an LSA Type from the
3. Click . The OSPF Link State Database displays entries starting
Start
with the specified LSA Type.
Click .
Or
Select
View > Refresh
. The Start Point dialog box opens.
LSA Type pull-down listbox.
. All entries appear in the table.
IP Route
133