Avaya P460 Manager User Manual page 20

Chapter 2
Selected ports and LAGs can be configured using the Get/Set Toolbar. To
change the configuration of a port or LAG, click the button that
represents the value of the parameter you want to apply to the port or
LAG. Click
discard the changes. Options not applicable to the selected port or LAG
are dimmed.
To configure the ports of a LAG, select the LAG icon in the Tree View or
Chassis View. Ports belonging to a LAG may not be configured by
selecting the port.
Multiple ports and LAGs can be simultaneously configured using the
Get/Set Toolbar. When multiple ports or LAGs with non-identical
configurations are selected, only the parameters whose settings are
identical on the selected ports or LAGs are reflected in the Get/Set
Toolbar. For example, if a port operating at full duplex and a port
operating at half duplex are selected, neither of the duplex mode buttons
on the Get/Set Toolbar are depressed.
The table below displays the buttons on the Get/Set Toolbar and explains
their functions and settings.
You can toggle the display of the Get/Set Toolbar. To toggle the display of
the Get/Set Toolbar, select
10
to update the device with the changes. Click
apply
Button Description
Get and set the port/LAG's speed: 10 Mbps, 100
Mbps, 1000 Mbps.
Get and set the port/LAG's status: Enabled, Disabled.
Get and set the port/LAG's mode: Half duplex, Full
duplex.
Get and set the port/LAG's auto-negotiation status:
Enabled, Disabled.
Get and set the port/LAG's STP mode: Enabled,
Disabled.
Get and set the port/LAG's priority. Select a priority
level between 1 and 8 using the pull-down listbox.
Apply or cancel the configuration changes made
with the Get/Set Toolbar.
Table 2-2. Get/Set Toolbar
View > Toolbars > Show Get/Set Toolbar
cancel
.
Avaya P460 Manager User Guide
to