Avaya P460 Manager User Manual page 128

Chapter 15
Field
Status
You can create or delete ARP table entries. For more information on
editing tables, refer to "Editing Tables" on page 100.
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
To view all the entries in the ARP Table:
118
Table 15-4. ARP Parameters (Continued)
Description
The status of the interface. Possible status values
are:
1. Click .
Or
Select Action > Start Point
Figure 15-6. ARP Table Start Point Dialog Box
2. Enter an IP address in the
3. Select an interface from the
4. Click OK . The ARP Table displays entries starting with the specified
IP address and interface.
Click .
Or
Select
View > Refresh
• - The entry is learned from the
Dynamic
ARP protocol. If the station entry is not
active for a predetermined time, the entry
is deleted from the table.
• - The entry has been configured by
Static
the network management station and is
permanent.
• Invalid - The entry in the table is invalid.
. The Start Point dialog box opens.
field.
IP Address
listbox.
If Name
. All entries appear in the table.
Avaya P460 Manager User Guide