Fisher & Paykel ACTIVESMART RS80 Installation Manual page 34

Tools Attach the door panels
Open the door and loosen the M5x10 cross-head screws
1
(do not remove) at the sides of the doors (A).
Hang the door panel by inserting the M8 studs
2
Hex key
through the holes of the hanging bracket (B).
Slide the forks of the side brackets onto the
3
screws of the door (C).
Screw the M8 washer and nut to each stud (D),
4
and re-tighten the side screws (E) to fix the
door panel (do not fully tighten). This will
FPA spanner
allow opening the door without affecting
(1)
adjustment of the door panel.
Cross-head screwdriver
Powered driver (optional)
32
!9 DOOR PANEL INSTALLATION — CUSTOM
E
A
C
B
D