Fisher & Paykel ACTIVESMART RS80 Installation Manual page 13

Dimensions apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
392.3mm
54.8mm
34.7mm
Ensure handle is mounted
65mm from inner edge of panel
to the center — this will avoid
interference with brackets.
All measurements to be made
from inner bottom corner.
34.7mm
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
414mm
TOP PANEL — REAR VIEW
7 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS90
Ø 2mm REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
385mm
128mm
29.1mm
All measurements to be made
87.2mm
from top and centerline.
416mm
Cut outs are located in attachment bracket for Fisher & Paykel handles only.
If locating custom handle in the shaded area above, ensure handle screw heads
are counter sunk into back of panel to avoid interference with hanging bracket.
BOTTOM PANEL — REAR VIEW
Ø 2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
11