Console - ProGear Air Elliptical 1307 Owner's Manual

SPECIFICATIONS:
TIME ---------------------------------------------------- 00:00-99:59 MIN: SEC
SPEED ------------------------------------------------- 0.0-999.9
DISTANCE -------------------------------------------- 0.00-99.99
CALORIE ---------------------------------------------- 0.0-999.9
PULSE ------------------------------------------------- 40-200
USING YOUR CONSOLE
The computer console can be activated by pressing the MODE button or
by pedaling. If you leave the equipment idle for 4 minutes, the power will
turn off automatically.
MODE BUTTON FUNCTIONS:
Press the MODE button once to select the desired function of the
computer console.
Press and hold the MODE button for 4 seconds to reset all data values.
CONSOLE FUNCTIONS:
SCAN: Press the MODE button until the arrow points to SCAN, the computer console will
automatically scan through each function except the PULSE function every 6 seconds.
TIME: Press the MODE button until the arrow points to TIME, the computer console will
display your elapsed workout time in minutes and seconds.
SPEED: Press the MODE button until the arrow points to SPEED, the computer console will
display the current training speed.
DISTANCE: Press the MODE button until the arrow points to DISTANCE, the computer
console will display the cumulative distance traveled during the workout.
CALORIE: Press the MODE button until the arrow points to CALORIE, the computer
console will display the ESTIMATED number of calories you have burned during the workout.
Please note that the readings are only estimates and there are many factors that can't be
accounted for such as fitness level, body fat percentage, age, weight, and gender.
PULSE: Press the MODE button until the arrow points to PULSE, the computer console will
display your current heart rate readings. This will work ONLY if BOTH hands are gripping the
hand-pulse sensors. No readings or inaccurate readings may occur if only one hand is
gripping the hand pulse sensor.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer console.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Ensure that the batteries are correctly positioned and the battery springs are in physical contact
with the batteries.
4. Replace the battery cover on to the back of the console.
5. If the display is illegible or only partial segment appears, remove the batteries and wait 15
seconds before reinstalling.

CONSOLE

MPH
MILE
KCAL
BPM
22