Table of Contents
Advertisement
Adjusting the Tension Control Knob
To increase the tension, turn the Tension Control
Knob (37) in a CLOCKWISE direction. To decrease
the tension, turn the Tension Control Knob (37)in a
COUNTER-CLOCKWISE direction.
NOTE: After prolong use of the equipment, the
Tension Strap (63) will begin to stretch out and it will
become necessary to tighten the strap for optimum
performance.
1.
Before tightening the Tension Strap (63), the
Tension Control Knob (37) must be set to its lowest
setting. To do this turn the Tension Control Knob (37)
in a COUNTER-CLOCKWISE direction until it is at its
lowest setting.
Do not continue to turn the Tension Control Knob
(37) after reaching its lowest or highest setting for
it may damage the knob.
2.
To tighten the Tension Strap (63), undo the
buckle of the Plastic Clip (95) and then pull the top
strap on the front of the unit away (downward). Close
the buckle of the Plastic Clip (95) to lock in place. Only
minimal adjustment is needed.
3.
Without changing the tension, you should now be
able to feel a little resistance (i.e. the Fan Wheel (49) is
not turning freely). If you are satisfied with the base
level tension, then you may select the desired tension
and continue exercising.
OPERATIONS & ADJUSTMENTS
Tension Control Knob (37)
23
95
Advertisement
Table of Contents
