Kwikset Kevo Quick Manual

Hide thumbs Also See for Kevo:

60685 / 01

Remove the exterior assembly, interior assembly and

batteries from the package.

Remove the mounting plate, battery cover and battery pack

from the interior assembly.

Lay the interior assembly on a flat surface, with the Kwikset

label facing down.

Touch Sense Test

Perform the following test prior to installation to make sure

your Kevo lock's touch sensor is working correctly.

Remove the adapter ring from the exterior assembly and

set it aside.

Install 4 AA batteries into the battery pack.

Connect the exterior assembly to the interior by inserting the

exterior torque blade into the turnpiece shaft.

Table of Contents

Do you have a question about the Kevo and is the answer not in the manual?

Page 1 Remove the mounting plate, battery cover and battery pack Install 4 AA batteries into the battery pack. from the interior assembly. Lay the interior assembly on a flat surface, with the Kwikset Connect the exterior assembly to the interior by inserting the label facing down.
Page 2 If you see the light ring spin blue, your Kevo’s touch sensor If you don’t see the light ring spin blue, the touch sensor is is working properly, and you can disconnect the parts and not functioning properly.