Barco UDM Series User Manual page 117
Hide thumbs
Also See for UDM Series:
- Installation manual (88 pages) ,
- Installation manual (104 pages) ,
- User manual (210 pages)
Table of Contents
Advertisement
Image 10-6: WiFi menu
2.
Put the upper switch to the right to enable the WiFi module. The color of the switch becomes blue.
3.
Make sure the second switch is set to the right (automatic).
Image 10-7: Automatic assignment
4.
Select the Select SSID drop-down menu and select the desired wireless network.
Tip: If the desired wireless network is not in the list or hidden by default, select "Add New SSID". Fill in
the details of the network.
Image 10-8
5.
If required by the chosen wireless network fill in the user name, password and confirm.
Tip: If you already connected to this network in the past using this projector, the software will
remember the user name and password, ensuring you do not have to fill this in again.
6.
Press Connect to connect to the selected network.
An automatic IP address is assigned.
When connected to this network, it is indicated in the upper right corner of the menu with the term "connected".
GUI – System Settings
R5911443 /02
UDM
117
Advertisement
Table of Contents
