Reset - Barco UDM Series User Manual

GUI – System Settings
Image 10-30: Backlight menu
2. Choose the desired setting for the backlights. Select one of the predetermined options, or a custom value.

10.11 Reset

What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
Option
DMX
Illumination
ImageBlend
ImageConnector
ImageConvergence
ImageDisplay
ImageFeatures
ImageOrientation
ImageRealColor
128 R5911443 /02 UDM
Setting
DMX Mode
Start Channel
Power
Blend/Mask size
Black Level
Black Level Files
Blend Files
Color Space
Signal Range
Electronic Convergence
Display mode
Contrast
Brightness
Saturation
Sharpness
Gamma
Cropping
Aspect Ratio
Scaling
Orientation
P7 Realcolor
Factory setting
Basic
1
100%
Disabled, all value to zero
Disabled, all files deleted
auto
auto
All values to zero
AutoStereo
mid value
mid value
mid value
mid value
mid value
Off
16:9
Fill Aspect ratio
Table, Front
all set to native