Table of Contents
Advertisement
2.3 OPERATOR REqUIREMEnTS
The operator must ensure the following:
- That the safety regulations of the operating instructions are observed.
- That the accident prevention regulations valid in the respective coun-try of
use and the general safety regulations are observed.
- That all safety devices (covers, warning signs etc.) are present, in perfect
condition and are used correctly.
- That national and regional safety regulations are observed.
- That the personnel has access to the operating instructions and safety
regulations at all times.
- That operating conditions and restrictions resulting from the technical data
are observed.
- That, should abnormal voltages, noises, increased temperatures, vibra-
tion or similar occur, the device is immediately put out of operation and the
maintenance personnel is informed.
2.4 PERSOnnEL REqUIREMEnTS
Only qualified electro-technical personnel who are familiar with the
pertinent safety and installation regulations may perform the following:
- Transport
- Installation
- Connection
- Start-up
- Maintenance
- Testing
- Operation.
These operating instructions must be read carefully by all persons working
with or on the equipment prior to installation and initial start-up.
2.5 InTEnDED PURPOSE
The device may only be used for the pupose for which it was intended,
as persons may otherwise be exposed to dangers (e.g. electric shock,
burns) and plants also (e.g. overload). The user must therefore observe
the following points:
- It is not permitted to make any unauthorised modifications to the
unit or to use any spare parts or replacement parts not approved by Advan-
ced Energy, or to use the unit for any other purpose.
9
Advertisement
Table of Contents
