P NP Assemb ly In stru ctio ns
As the photo show:
Use elevator pushrod to connect the servo arm and elevator arm
(2pcs)
Battery Size
Cockpit
Velcro
Before connecting the battery and receiver, please
switch on the transmitter power and make sure
the throttle stick is in the lowest position. Bind your
receiver to your transmitter according to your
transmitter's instruction manual.
Install Nose Cone
Nose Cone
F-35 Lightning II
ltem No : FJ216-V01
Battery
Use rubberized non-slip tape
or hook-and-loop tape
Battery cabin size:
L=270mm W=75mm H=50mm
We recommend the following LiPo battery:
6S22.2V 3500mAh~6S22.2V 4500mAh
Discharge rate of C
> 30C
4