Overview; Control Panel - Flex ADM 60 Operating Instructions Manual

Overview

1 Front of device (reference plane
2 Laser discharge window
3 Receiver lens
4 Display

5 Control panel

6 Laser warning sign
7 ¼" thread (reference plane
8 Battery compartment
9 Wrist strap
10 Stop pin (reference plane
11 Base of device (reference plane
12 Belt pouch (not illustrated)
Control panel
13 On/Off button
)
)
14 Measurement button
)
Switches the power tool on and off.
When the measuring instrument has
been switched on, linear measurement
(in metres) is always active. To switch off
the measuring instrument, hold down the
button. If the measuring instrument is not
used for 5 minutes, it automatically swit-
ches off to protect the batteries.
Briefly pressing the button switches the
laser beam on or actuates the measure-
ment (depending on selected measuring
FLEX ADM 60
)
13