Securing The Child Restraint System With The Seat Belt - Mercedes-Benz GLE Series 2020 Operator's Manual

If necessary, slide head restraint
#
( page 105).
/
Install the LATCH-type (ISOFIX) child restraint
#
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
Guide Top Tether belt 5 under head
#
restraint 1 between the two head restraint
bars.
If cargo compartment cover 3
#
guide Top Tether belt 5 downwards
between cargo compartment cover
seat backrest 2.
Hook Top Tether hook 6 of Top Tether belt
#
5 into Top Tether anchorage 4
twisting.
Tension Top Tether belt 5. Comply with the
#
child restraint system manufacturer's instal‐
lation instructions when doing so.
If necessary, slide head restraint
#
wards ( page 105). Make sure that you do
/
not interfere with the correct routing of Top
Tether belt 5.
Securing the child restraint system with the
1 upwards
seat belt
Securing the child restraint system with the
seat belt on the rear seat
& WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
is installed,
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
3 and event of an accident.
If this is the case, the vehicle occupant
R
would be forced into the seat belt by the
without
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
Objects or loads in the trunk/cargo com‐
R
partment cannot be restrained by the
1 down‐
seat backrest.
61
Occupant safety