Mercedes-Benz GLE Series 2020 Operator's Manual page 114

112 Seats and stowing
& WARNING Risk of becoming trapped
while adjusting the easy entry and exit
feature
When the easy entry and exit feature adjusts
the steering wheel and the driver's seat, you
and other vehicle occupants – particularly
children – could become trapped.
During the adjustment process of the
#
easy entry and exit feature, make sure
that no one has any body parts in the
sweep of the seat or the steering wheel.
If there is a risk of becoming trapped by the
steering wheel:
Move the adjustment lever of the steer‐
#
ing wheel.
The adjustment process is stopped.
If there is a risk of becoming trapped by the
driver's seat:
Press the seat adjustment switch.
#
The adjustment process is stopped.
Vehicles with memory function: You can stop
the adjustment process by pressing one of the
memory function position switches.
& WARNING Risk of becoming trapped
during activation of the easy entry and
exit feature by children
If children activate the easy entry and exit
feature, they can become trapped, particu‐
larly when unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the SmartKey with you and lock the
vehicle.
If the easy entry and exit feature is active, the
steering wheel will move upwards and the driv‐
er's seat will move back in the following situa‐
tions:
You switch the ignition off with the driver's
R
door open
You open the driver's door with the ignition
R
switched off
% The steering wheel will move upwards only if
it is not already as high as it will go. The driv‐
er's seat will move backwards only if it is not
already in the rearmost position.
The driver's seat backrest will move for‐
wards only if it is not already in the foremost
position.
The steering wheel and the driver's seat will
move back to the last drive position in the fol‐
lowing cases:
You switch the power supply or the ignition
R
on when the driver's door is closed
You close the driver's door with the ignition
R
switched on.
The last drive position will be stored when:
You switch the ignition off.
R
Vehicles with memory function: You call
R
up the seat settings via the memory function.
Vehicles with memory function: You save
R
the seat settings via the memory function.
Vehicles with memory function: Press one of
the memory function saved position buttons to
stop the adjustment process.