Mercedes-Benz GLE Series 2020 Operator's Manual page 552

550 Display messages and warning/indicator lamps
Vehicle
Display messages Possible causes/consequences and
Update Successfully Com- * Installation of the software update has been successfully completed (
pleted
Update Failed Software * An error occurred during the installation of the software update (
Remains Unchanged
Update Failed * An error occurred during the installation of the software update (
* You are leaving the vehicle when it is in a ready-to-drive state.
d
Vehicle Ready to Drive
Switch the Ignition Off
Before Exiting
The current software release remains in place.
Make a Mercedes me call via the overhead control panel (
When you leave the vehicle, switch off the ignition, secure the vehicle against rolling away and take the Smart‐
#
Key with you.
If you do not leave the vehicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the 12 V
#
battery may discharge and it will then be possible to start the vehicle only with the aid of a second battery
(starting assistance).
Solutions
M
/
page 355).
/
page 355).
/
page 420).
/
page 355).