Fastening And Adjusting Seat Belts - Mercedes-Benz GLE Series 2020 Operator's Manual

40
Occupant safety
Modified Emergency Tensioning Devices may
be deployed unintentionally or not function
as intended.
Never modify the seat belts, Emergency
#
Tensioning Devices, seat belt ancho‐
rages or seat belt retractors.
Make sure that the seat belts are not
#
damaged, are not worn and are clean.
Always have the seat belts checked
#
immediately after an accident at a
qualified specialist workshop.
Only use seat belts that are approved for your
vehicle by Mercedes-Benz.
& WARNING Risk of injury or death from
deployed pyrotechnic Emergency Ten‐
sioning Devices
Pyrotechnic Emergency Tensioning Devices
that have been deployed are no longer opera‐
tional and are unable to perform their inten‐
ded protective function.
Therefore, have deployed pyrotechnic
#
Emergency Tensioning Devices immedi‐
ately replaced at a qualified specialist
workshop.
Mercedes-Benz recommends that you have the
vehicle towed to a qualified specialist workshop
after an accident.
* NOTE Damage caused by trapping the
seat belt
If an unused seat belt is not fully retracted, it
may become trapped in the door or in the
seat mechanism.
Always ensure that an unused seat belt
#
is fully retracted.

Fastening and adjusting seat belts

If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can‐
not be pulled out any further.
Always engage seat belt tongue
#
seat belt into seat belt buckle 1
responding seat.
Press and hold the seat belt outlet release
#
and slide seat belt outlet 3 into the desired
position.
Let go of the seat belt outlet release and
#
ensure that seat belt outlet 3 locks into
position.
2 of the
of the cor‐