Mercedes-Benz GLE Series 2020 Operator's Manual page 519

Position of jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned
vertically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet wrench out of the tire-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
Wheels and tires 517
Position jack 2 at jack support point 1.
#
Turn ratchet wrench 3 clockwise until jack
#
2 sits completely on jack support point
and the base of the jack lies evenly on the
ground.
Continue to turn ratchet wrench
#
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
Loosen and remove the wheel (
/
#
1
3 until the
page 518).