Disposal - Cornelius LOOP STYLE XL CC Manual


Caution!
Damage due to improper storage
Dirt or moisture entering a unit, as well as certain weather conditions (e.g. condensate forming
at the unit, sunlight) will cause damage to the unit and its components.
• Protect the unit and its components by storing the unit in a clean and dry place, and by
ensuring stable ambient conditions.
• If possible, store the unit in its original packaging. Unpacked units must be covered with a
dustproof cover. No condensate must form under the cover.
Caution!
Risk of electrostatic charge!
Improper handling or storage may result in electrostatic charges.
If possible, store units and/or any electronic components in their original packaging.
-
Keep units and/or electronic components away from charged objects, fields and insulators.
-
- Avoid electrostatic charges when removing packaging and/or handling electronic
assemblies and components by working at an ESD protected workstation or work area.
When working at the unit or its components wear a grounding (antistatic) wrist strap at the
-
very least and wear antistatic gloves if necessary.
Caution!
Component damage due to material ageing
Material can age due to long storage periods, thereby affecting the material's properties (e.g.
plastics and seals may become brittle). The properties of lubricants may change due to long
storage periods.
Check the assemblies and components for damage before each use/before installing
-
them. Do not install assemblies or components that show visible signs of ageing.
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or cleaning
agent residue remaining inside the unit. This will lead to damage to internal components.
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the cleaning
solution is to be fully drained from the unit.
3

Disposal

Disposal of the units must be carried out in compliance with the applicable local and/or national and
international regulations. Units must not be disposed of with household waste.
If the unit contains fuels or lubricants in liquid, paste-like or gaseous form, such as oil, grease, cooling
agents etc., such fuels or lubricants are to be collected using appropriate measures and disposed of in
compliance with the applicable local and/or national and international regulations. Such fuels or lubricants
must always be prevented from seeping into the ground, the sewage system and any bodies of water, and
must always be prevented from entering the atmosphere.
Cornelius Deutschland GmbH
Document no: TD1009600EN
Version A, 24.09.2019, Index 0
LOOP Style XL CC
Manual operation Countertop Vending Machine
LOOP Style XL CC
Page 8