Disclaimer Of Liability And Warranties; Safety Information To Prevent Personal Injury And Equipment Damage - Cornelius LOOP STYLE XL CC Manual



Disclaimer of liability and warranties

If work is undertaken on the unit which is not described in this document, Cornelius Deutschland GmbH
shall not assume any liability for any resulting hazards and damages. The same applies to described
work which is partly or not fully performed in compliance with the regulations set out in this document.
Warning!
Risk of personal injury and equipment damage due to improperly executed work
Improperly executed work at the unit will cause dangers to persons and damage to the
unit.


Warning!
Risk of personal injury and equipment damage due to the use of non- approved spare parts
and accessories
Using spare parts and accessories that are not recommended by the manufacturer may
lead to personal injury and equipment damage.

For your own safety and to protect your warranty, only use original spare parts.

Safety information to prevent personal injury and equipment damage

Please always observe the following safety information in order to prevent personal injury occurring:
Danger!
Risk of death from electric shock
Touching live electrical parts will result in a risk of electric shock!

Warning!
Risk of burns when touching hot parts of the unit
Touching parts of the unit after it has been in continuous use over an extended period of
time will result in a risk of burns.
Danger!
Risk of poisoning and risk of explosion due to improper handling of CO 2 cylinders
Risk of death from CO 2 !

Observe all information on occupational safety for the safe operation of dispensing
systems as applicable in the respective country of installation.
Danger!
Risk of personal injury and equipment damage due to improper operation
Risk of death from improper operation!

Make sure that only users who are users as defined in the user section use the
unit; see chapter 1.3.2, page 5.

Children must be supervised to ensure that they do not play at or with the unit.
Cornelius Deutschland GmbH
Document no: TD1009600EN
Version A, 24.09.2019, Index 0
Have all work at the unit carried out by Cornelius Deutschland GmbH or by a
service partner.
Do not carry out any work on the electrical system.
•
Take appropriate safeguard measures, such as by
wearing heat- resistant protective gloves.
LOOP Style XL CC
Manual operation Countertop Vending Machine
LOOP Style XL CC
Page 6