Transport And Packaging; Storage - Cornelius LOOP STYLE XL CC Manual


Danger!
Risk of personal injury and equipment damage due to leaking refrigerant
In accordance with DIN EN 378 standard, part 1, the refrigerant used with this unit, R290
(propane), is classified as safety group A3. It is not poisonous and not caustic or
corrosive. However, it is combustible and highly flammable. As a result, a potentially
explosive atmosphere may occur in the case of leaks.
The refrigerant is heavier than air and, consequently, accumulates at the bottom and may
enter lower lying areas (e.g. sewage systems). At high concentrations, this may lead to a lack
of oxygen, resulting in a risk of suffocation. Lower concentrations may have a narcotic effect.
The refrigerant has a very slight, somewhat sweet smell.

Avoid any damage to components that carry the refrigerant

If you suspect any leaks, however small, shut down the unit, air the room well and
inform your service partner.

Do not allow direct contact with the skin of any leaking refrigerant.

Fire, open flames and smoking are prohibited.

If you begin to notice any smell, leave the room and alert the fire service
Notice!
2

Transport and packaging

Choose a suitable packaging when returning the unit itself or one of its components to Cornelius Deutschland
GmbH, e.g. for repairs. In particular, make sure that the unit and any components are protected from
shock/impact, moisture, dirt and electrostatic discharge (ESD). This will prevent transport damage to the unit
and to the components, for which the manufacturer shall assume no liability.
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or cleaning
agent residue remaining inside the unit. This will lead
to damages of internal components.
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the cleaning
-
solution is to be fully drained from the unit.

2.1 Storage

Avoid excessive temperature fluctuations as condensate may form, which in turn may cause damage to the unit
or to the components.
The permissible storage temperature is -10 °C to +50 °C.
The acclimatization period is 6 hours.
Cornelius Deutschland GmbH
Document no: TD1009600EN
Version A, 24.09.2019, Index 0
In particular, safety standards are to be observed in their scope of validity
(e.g. EN 60335-2-75).
LOOP Style XL CC
Manual operation Countertop Vending Machine
LOOP Style XL CC
Page 7