Safety Instruction - HIKVISION PanoVu PT Series Quick Start Manual

These instructions are intended to ensure that the user can
use the product correctly to avoid danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical
safety regulations, and fire prevention regulations.
Transportation
ngs are
Keep the device in original or similar packaging while transporting it.
Power Supply
any of
The input voltage should conform to IEC60950-1 standard: SELV
material
(Safety Extra Low Voltage) and the Limited Power Source. Refer to the
appropriate documentation for detailed information.
The standard power supply is 12 VDC or Hi-PoE, please make sure
your power supply matches with your camera.
DO NOT connect multiple devices to one power adapter, to avoid over-
heating or fire hazards caused by overload.
Make sure the plug is properly connected to the power socket.
This is a class A product. In a domestic environment this product may
cause radio inter-ference in which case the user may be required to take
adequate measures.
System Security
The installer and user are responsible for password and security
configuration and its settings.
Battery
Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. Dispose of used
batteries in conformance with the local codes.
Maintenance
If the product does not work properly, please contact your dealer or
the nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside surfaces
of the product cover. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device lens is
not exposed to the laser beam, or it may burn out.
Do not expose the device to high electromagnetic radiation or dusty
environments.

Safety Instruction