Advertisement
Quick Links
MODEL MHW-341-X
EQUIPPED FOR DIRECT RING-DOWN OPERATION
Communication Equipment
& Engineering Company
SERVICE MANUAL
MAGNETIC HOOKSWITCH
WALL TELEPHONE
Sold by:
FOR
http://www.TWAcomm.com
Toll Free: (877) 892-2666
Serving the Telephone Industry Since 1930
MHW-341-X-ISSUE4.0
th
1580 NW 65
Avenue
Plantation, FL 33313
Voice: 954-587-5430
Fax: 954-587-5440
Advertisement
Related Manuals for CEECO MHW-341-X
Summary of Contents for CEECO MHW-341-X
- Page 1 MHW-341-X-ISSUE4.0 SERVICE MANUAL MODEL MHW-341-X MAGNETIC HOOKSWITCH WALL TELEPHONE EQUIPPED FOR DIRECT RING-DOWN OPERATION Sold by: http://www.TWAcomm.com Toll Free: (877) 892-2666 Serving the Telephone Industry Since 1930 Communication Equipment 1580 NW 65 Avenue & Engineering Company Plantation, FL 33313 Voice: 954-587-5430...
- Page 2 ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL MHW-341-X SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
-
Page 3: Table Of Contents
4.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS .. 5 5.0 TESTING ....................6 6.0 SPECIFICATIONS................7 7.0 PARTS LIST..................8 8.0 FCC NOTICE..................9 9.0 REPAIR AND RETURN INFORMATION ........10 10.0 WARRANTY POLICY ..............11 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
(954) 587-5430 (954) 587-5440 FAX GENERAL The CEECO Model MHW-341-X Magnetic Hookswitch Wall Style Telephone is equipped with a magnetically operated hookswitch. The MHW-341-X is designed for special applications where a telephone must be sturdy and attractive, and also provide ring-down operation for automatic dialing. It is equipped to interface with a Central Office type ring down lines or independent ring-down switches. -
Page 5: Installation Notes And Assembly Instructions
Run the inside station wire into the enclosure and terminate on the RJ11C terminal block inside. As depicted on the following page. The CEECO provided terminal block (jack) must be used, as it contains required over- voltage protection circuitry. -
Page 6: Testing
Place a call to the phone (if permitted by the external equipment). The phone should ring indicating the incoming call. Upon answering, normal telephone operation should follow. Hang up the phone. It is ready for use. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Specifications
Temperature 0°C to 50°C Humidity 20%-90% non-condensating PROGRAMMING: TELEPHONE COVER: Brushed 16 ga. Stainless Steel MEMORY RETENTION: WEIGHT: Approximately 5 lb. RINGER EQUIVALENCY: 0.4A FCC REGISTRATION: BW-88T7-13716-TE-T UL LISTED NO.: 6OF5 TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 8: Parts List
Stainless Steel Housing with backplate. 12027 Network. 6017 Reed Switch. 14010 Modular Cord. 9023 1/4" –20-3/4" Security Screw. 9005 Grommet. 14014 Modular Jack. 9020 Security Tool. 8093 29" Armored Cord Magnetic Handset 14018 Magnetic Assembly. 12017 Ringer. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 9: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Repair And Return Information
(305) 587-5430 (305) 587-5440 (FAX) NON-WARRANTY REPAIR: CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. RETURN FOR CREDIT: Material may be returned for credit only with prior approval. Material authorized for return is subject to a 15% restocking charge based on the manufacturer's list price. -
Page 11: 10.0 Warranty Policy
PRINTED CIRCUIT BOARDS Printed circuit boards should not be field repaired. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty.
Need help?
Do you have a question about the MHW-341-X and is the answer not in the manual?
Questions and answers