Messages And Faults - Grohe SENSIA IGS Operating Instructions Manual

OPERATING INSTRUCTIONS
11.2

Messages and faults

LED display on the shower-toilet
The LED display can be found on the left-hand side of the unit. It provides assistance for
night-time toilet trips and information on any maintenance required or possible faults on
your shower-toilet.
White
Red
Red flashing
Intermittent white
flashing
Hygienic ush required
Decalci cation required
Replace the odour lter
LED display Information
Normal operation Everything OK.
Care instructions
Fault indications
Care programme
active
Messages via the remote control
Messages and fault indications on your shower-toilet
are explained in more detail on the remote control in the
" Service information " menu.
Press " Service information " for more information.
GROHE customer service
Please contact your specialist installation engineer or the
GROHE Customer Service line if you have any problems
which cannot be resolved using the operating instructions.
Please have the remote control to hand. You can also report
the fault via the website www.grohe.com
Description
Please activate the remote control for further information.
Please contact your specialist installation engineer or
the GROHE Customer Service line and have your remote
control to hand for further information.
If the white LED display is flashing intermittently, the
decalcification or hygienic flush programme is active.
266