Getting Started - Westpac Presto Smart VX690 Quick Reference Manual

Getting started.

Power terminal up.
To power up the terminal, press and hold the
Getting your terminal started.
1. Press the Go button on the screen or the
to get started.
2. Please select the method of connecting to the internet that you will be
using with your Presto terminal.
3. For Wifi press 1 on the terminal key pad, or touch the Wifi button on
the terminal screen (continue to step 4) or for Ethernet press 2 on the
terminal key pad, or touch the Ethernet button on the terminal screen
(continue to step 6).
4. Please select your Wifi network or search for your network name. If you
cannot find your Wifi network, make sure you refresh and try again.
5. Enter your Wifi password using the keypad.
6. If connecting via Ethernet, please refer to the FAQ's at
westpac.com.au/prestosupport.
1
key for 5 seconds.
key on the terminal