Cleaning And Care - Silvercrest SDRF 10 B1 Operation And Safety Notes

Note: The factory reset will erase all settings, including the station
presets and the station list.
Press and hold the Menu / Info button
Turn the jog dial control element
settings in the menu.
Press the jog dial control element
Under system settings, select the "Factory reset" function and then
press the jog dial control element
will display the message, "All settings will be restored to factory
settings. Are you sure?".
Turn the jog dial control element
the selection by pressing the jog dial control element
Note: A factory reset is only possible in network operation. If you
operate the product using batteries and select "Yes" in order to
carry out a factory reset, the colour LCD
ing message, "Factory Reset is only available in mains operation".
Connect the product to the mains power as described in the chap-
ter "Connecting the mains adapter to the mains power supply".

Cleaning and care

Unplug the power supply
the product.
Do not use solvents or other aggressive or abrasive cleaning
agents, as these may damage the surfaces and the markings.
Only clean the outside of the product, using a soft, dry cloth.
to open the menu options.
9
left or right to switch to system
13
to confirm.
13
to confirm. The colour LCD
13
left to select "Yes" and confirm
13
1
from the mains socket before cleaning
15
again.
13
will display the warn-
GB/IE/NI
1
41