External Audio Sources; Using Headphones; Cleaning And Care - Silvercrest KH 2322 Operating Instructions Manual

SilverCrest KH 2322
➪ For as long as the notification SLEEP
is blinking in the Display
through repeated pressing of the but-
ton SLEEP , shorten the switch-off
time to 60, 30 or 10 minutes.
➪ Through once again pressing the button
SLEEP the notification SLEEP dis-
appears from the Display
switch-off period is deactivated. The
radio continues to play.
➪ Place the rotating switch
position ON ,and then back again to
the position OFF/AUTO, to switch the
radio off.

External audio sources

You can connect external audio sources
to this appliance with a 3,5 mm jack
plug.
• Connect the audio output of the
external audio source to the AUX IN
connection .
• Adjust the rotary switch
position AUX.
• The signals from the external audio
source will now be reproduced over
the loudspeakers.

Using headphones

you can,
You can connect headphones to the
appliance with a 3,5 mm jack plug. The
headphone connection socket
ted at the rear of the appliance. When
headphones are connected, the loud-
and the speakers are deactivated and sounds
can only be heard over the headphones.
➩
into the Insert the 3,5 mm jack plug into the
headphone connection socket
Warning!: To avoid hearing damage
when using headphones do not set the
volume level too high.

Cleaning and Care

Attention - Danger of an electric
shock:
Before cleaning the appliance:
➪ Remove the power plug from the
power socket.
➪ Never open the housing. There are
to the
no user-servicable elements inside.
➪ Clean the applicance only with a
lightly moistened cloth.
➪ Do not use detergents or solvents.
These could damage the plastic surfaces.
- 8 -
is loca-
.