JRC JCY-1900 Instruction Manual page 49

5. Check the VDR system starts up normally on the OPU screen.
If the VDR system starts up normally, the OPU displays the HOME screen.
If alerts have occurred, clear it by following the procedure described in "4.3 Checking the Alert".
[Information]
If the optional DAU is added, an alert occurs in the start-up because the VDR system is not
setting the initial heading angle data. See "4.7 Initial Setting of the Heading Angle" and set the
initial heading angle data.
Chapter 3 Starting and Stopping the System
Figure 3-8 HOME screen
13