JRC JCY-1900 Instruction Manual page 104

Chapter 4 Operation Method
3. Set the date and time when the accident occurred.
Using four buttons shown in Table 4-25, set the cursor center to the date and time when the
accident occurred. As center on the cursor, the recorded data is preserved from three hours
before to three hours after. The recorded data is preserved a total of six hours.
[Information]
Even if the recorded data preserved within three hours after the occurrence of the accident, the
recorded data is preserved from the occurrence of the accident to three hours later.
Button
Sets one day before.
Sets one day after.
Sets one hour before.
Sets one hour after.
68
Figure 4-61 Set cursor center to accident time
Table 4-25 The button to set the date and time
Set the cursor center to the
date and time when the
accident has occurred.
Function