Timer - Edision picco T265 User Manual

Timer mode:
Timer service:
Station:
Date:
Start time:
Duration:
Standby at the end:
Exit the timer menu with the EXIT button. After making changes and wanting to keep them, confirm with
'Yes' in the appearing dialogue window.
Note: An error message appears under certain circumstances. As a rule, an incorrect start time or start date
was given. Check the information!
Note: A recording is only possible if a compatible USB memory device is connected to the receiver.
Note: A list of all programmed Timers can be found as follows: Press the EDIVISION button in the TV mode
and then the yellow button, and then select 'Timer List' in the appearing menu window.
20
the timer menu automatically switches to the next (available)
programmable timer. Use the left/right arrow buttons or OK button and
the up/down arrow buttons to switch between (programmed) timers.
Set the recording mode here. Choose whether the recording is carried
out once, daily, weekly or monthly.
Specify a service here. Select the item 'Recording TV Channel' or
'Recording Radio Channel' for recordings. If wanting to be woken with
a specific channel, select the 'TC Channel' or 'Radio Channel' here.
Select the 'Message' input if wanting to display a message on the
screen at a certain time. Wake-up message: This item only appears
when coming across the 'Message' setting in the previous item. This
allows to choose between 'Birthday', Anniversary' or 'General'.
This item does NOT appear when coming across the 'Message'
setting in the 'Timer Service' item. Otherwise, set the channel here to
be recorded or to which to be woken up.
Set the (start) date of the recording here.
Set the start time here.
This item is only changeable if the 'Recording TV Channel' value or
'Recording Radio Channel' value was set at the 'Timer Service' item.
Then set the duration of the recording here (recording length).
This item is only changeable if the 'Recording TV Channel' value or
'Recording Radio Channel' value was set at the 'Timer Service' item. It
is then possible to determine whether the receiver should switch into
standby mode after recording.

Timer

Up to 8 time-based events can
be programmed in this menu.
In addition to programming
recordings of Radio or TV
channels, it is also possible to
display events, such as a nice
birthday or anniversary greeting
at a certain time or specify to
which channel to be woken
up. Information on recordings
can also be found in section
EDIVISION.
Functions and settings in the
menu:
Timer number: Calling up
Version of 20 August 2019