Channel; Organizing Services - Edision picco T265 User Manual

► Channel

► Organizing Services

► Organizing Favourites
'Move', 'Lock', 'Delete', 'Rename' and 'Skip'.
Functions and settings in the menu:
Use the left/right arrow buttons to switch back and forth between the columns in the menu window, the up/
down arrow buttons to move the cursor up or down in the respective column.
Mark one or more channels in the left column by pressing the OK button. Use the red button to display
an overview of all channel lists/channel groups and enable an appropriate selection. The window overview
displays the list in which you currently are.
The green button displays other possible options. The following options are available:
Select all: All channels are selected.
Deselect all: All channels are deselected.
Select other: All channels are selected that were previously not selected.
Select TP: All channels of a transponder can be selected here.
The 'FIND' button allows quick search for channel (names). A search window appears after pressing this
button. Entry into the search field is done via a letter or numeric field actuated with the arrow buttons and
by pressing the OK button. Provided that channels with appropriate initial characters are found in the current
list, they will be displayed on the left-hand side. Exit the search window with the EXIT button.
How to move a channel:
1. Move the cursor (yellow bar) in the channel list to the channel to be moved.
2. Change now with the right arrow button in the right part of the menu and navigate the cursor with
the up/down buttons to the 'Move' symbol. The symbol is highlighted in colour.
3. Press the OK button.
Use now the up/down arrow buttons to move the selected channel in the list. It is also possible
4.
to use the page buttons.
5. By pressing the OK button, the channel remains at the new position and exits the 'Move' mode.
Version of 20 August 2019
Organizing Services
Your channel list(s) for TV
or Radio channels can be
customized in this menu.
Notes: Make sure the receiver
is in the correct mode. If wanting
to edit radio channel lists, the
receiver must be in radio mode.
The TV/Radio button enables
switching between TV and Radio
mode.
Standard: The left column of
the menu window shows the list
of the channels of the currently
selected channel list, the right
column shows the symbols for
13