Honeywell TotalPlant LCN System Installation page 97

This is an example of cabling for Enhanced Redundant Application Modules using
K4LCN/EAMR boards as shown in Figures A-9 through A-16. The boards can be
installed in either node position of the Dual Node Module. There are four combinations of
upper/lower node positions.
MP-DNCF01
Figure A-9 — Redundant Application Module Cabling (K4LCN/EAMR)
Figure A-9 and A-10 show front and back views of the same application.
Figure A-10 — Redundant Application Module Cabling (K4LCN/EAMR)
LCN System Installation
Front View
EAMR (51401996-100)
K4LCN (51401946-100)
EAMR (51401996-100)
K4LCN (51401946-100)
Interface Cable
(51304197-200)
Rear View
KLCN CA (51304542)
KLCN CB (51304544)
KLCN CA (51304542)
KLCN CB (51304544)
A-9
Lower Node P.S.
Fan
Fan
51092
AMR Cable (51304198)
AMR I/O (51304159)
51093
A.7
9/96