Code Lookup; Upgrading; Creader Vupgrading Flow - Launch CReader V User Manual

LAUNCH CreaderV User's Manual
ID) and CVN (Calibration verify number).

4.4 Code Lookup

Select [Code Lookup] in the Main Menu and press [ ] and the screen
will display the interface as shown below:
You can use [ ] [ ] key to change the first letter. It can be switched
among "P", "B", "C" and "U". And press [ ] moves the cursor to next.
And then press [ ] [ ] key to input number. After you input the code
number, press [ ] to view the definition of the code.
After viewing the definition, press [ ] to return to the Main Menu.

5. Upgrading

5.1 CreaderV upgrading flow
30