Registration (Pairing) - Motorola MBP50 User Manual

2.3

Registration (Pairing)

The Baby Monitor is pre-registered to your Parent Unit. You do not
need to register it again unless the Baby Unit loses its link with the
Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
1. Press the M button of the Parent Unit and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
del/ add/
3. Press the + UP button or - DOWN button to select
the O button to confirm.
4. Camera /
DOWN button to select the desired Camera and press the O button to
start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press the O button to confirm.
6. Press and hold the PAIR button underneath the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will cancel its old registration.
12
view/ scan
/ / will pop up, press the + UP button or -
menu will pop up.
is highlighted, the
add, and press
Getting Started