Help - Motorola MBP50 User Manual

7. Help

Display
No display
• Try recharging or press the RESET button once.
• Reset the units. Press the RESET button once on the Parent Unit and
unplug both the units' electrical power, then plug them back in.
• Is the unit turned on (green ON/OFF LED lit)?
Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON.
• Is the correct camera selected?Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button V to turn it on.
• When operating using batteries only, the Display will go blank after
5 minutes or 30 minutes or 60 minutes to save power (depending on
video settings). The unit is still active and will give you audio alerts. You
can reactivate the screen by pressing any button.
Registratio
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or press the RESET button once on the Parent Unit.
• If the Baby Unit is too far away it may be going out of range, so move
the Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting the Baby Unit from electrical power
and press the RESET button once on the Parent Unit. Wait about 15
seconds before reconnecting. Allow up to one minute for the Baby Unit
and the Parent Unit to synchronise.
• See 2.3 Registration (Pairing), if there is a need to re-register the units.
Help
21