Advertisement
BULB REPLACEMENT
1.
Turn the steering wheel counterclockwise. Remove
the two inner fender clips, and peel away the inner
fender.
INNER FENDER
2 CLIPS
2.
Insert your hand inside the inner fender, unplug the
connector from the fog light, and remove the bulb.
LEFT FOG
LIGHT
VEHICLE
CONNECTOR
BULB
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
730111AE
LEFT FOG
LIGHT
732103AY
AII 37566 (0709)
3.
Install the new bulb and socket to the fog light.
•
Use only a Honda halogen light bulb,
P/N: 33165-S5A-003.
Rating: 12V 55W H11 Halogen Light Bulb
•
Do not touch the bulb. Oily or greasy substances
on the bulb can shorten its service life due to the
heat produced when the bulb is turned on. If the
bulb is accidentally touched, wipe it clean with a
soft cloth that has been dampened with
denatured alcohol or a mild detergent solution.
•
When installing the new bulb, align the cutout on
the fog light with the tab on the new bulb and turn
the new bulb in completely. If not properly
aligned, the fog light may annoy oncoming
drivers.
FOG LIGHT
NEW BULB
NEW BULB
4.
Reinstall the removed parts. Check that the wire
harnesses are not pinched. Be sure to tighten the
clip and bolts securely.
5.
Check the operation of the fog light; adjust the
aiming if necessary.
CIRCUIT DIAGRAM
Turn.
FOG LIGHT
HARNESS
732104BY
9 of 10
Advertisement
