Advertisement
23. Remove the lower steering column cover (one screw
and two self-tapping screws).
24. Turn the steering wheel 90° counterclockwise, and
unplug the vehicle connector from the light/turn
signal switch.
VEHICLE
CONNECTOR
LIGHT/TURN
SIGNAL
SWITCH
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
LOWER
STEERING
COLUMN
COVER
SELF-TAPPING
SCREWS
SCREW
VEHICLE
HOLDER
CONNECTOR
LIGHT/TURN
SIGNAL
SWITCH
STEERING
WHEEL
25. Remove the two self-tapping screws from the
light/turn signal switch. While pushing the retaining
tab, slide out the light/turn signal switch, and remove
it from the steering column.
NOTE: Do not pull on the lever when removing the
light/turn signal switch. Do not damage the tab hole
of the steering column.
CASE
7111090Y
LEVER
26. Install the new light/turn signal switch on the steering
column using the two self-tapping screws. Hold the
case by hand, then install the new light/turn signal
switch onto the steering column.
NOTE: Do not push on the lever when installing the
light/turn signal switch. Push the case and set the
retaining tab to the tab hole securely.
CASE
6303180B
LEVER
AII 37566 (0709)
STEERING
COLUMN
TAB
HOLE
RETAINING
TAB
SELF-TAPPING
LIGHT/TURN
SCREWS
SIGNAL
SWITCH
STEERING
COLUMN
TAB
HOLE
RETAINING
TAB
SELF-TAPPING
NEW LIGHT/TURN
SCREWS
SIGNAL SWITCH
7109010E
7109020E
7 of 10
Advertisement
