Advertisement
Illustration of the Fog Lights Installed on the Vehicle
RIGHT
FOG LIGHT
FOG LIGHT
HARNESS
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
1.
Make sure you have the anti-theft codes for the
audio and navigation system (if equipped), and write
down the radio station presets.
2.
Disconnect the negative cable from the battery.
3.
Remove the front bulkhead cover (seven clips).
7 CLIPS
FRONT BUMPER
2 of 10
LIGHT/TURN
SIGNAL
SWITCH
FOG
LIGHT
HARNESS
LEFT
FOG LIGHT
740220AY
FRONT
BULKHEAD
COVER
742306BE
4.
Remove the front bumper (two self-tapping screws
and 10 clips).
•
Have an assistant help you when removing the
front bumper.
2 SELF-TAPPING
SCREWS
10 CLIPS
5.
Remove the three self-tapping screws from the front
bumper, and remove the left fog light cover.
6.
Repeat step 5 to remove the right fog light cover.
AII 37566 (0709)
COVER
3 SELF-TAPPING
SCREWS
(Reuse.)
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
FRONT
BUMPER
742307AE
732003AY
Advertisement
