Advertisement
14. Near the 1-pin connector, secure the fog light
harness to the vehicle harness with one wire tie.
GREEN
TAPE
FOG LIGHT
HARNESS
WIRE TIE
VEHICLE
HARNESS
15. Locate the vehicle ground terminal, and remove the
ground terminal bolt. Attach the fog light harness
ground terminal, and reinstall the ground terminal
bolt.
WIRE TIE
VEHICLE
HARNESS
FOG LIGHT HARNESS
GROUND TERMINAL
16. Near the ground terminal, secure the fog light
harness to the vehicle harness with one wire tie.
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
LEFT
HEADLIGHT
FOG LIGHT
HARNESS
732006BY
FOG LIGHT
HARNESS
LEFT
HEADLIGHT
TERMINAL
GROUND
BOLT
732007B
GROUND TERMINAL
17. Install the left fog light bracket on the front bumper as
shown.
FRONT BUMPER
LEFT FOG LIGHT
BRACKET
FRONT
BUMPER
18. Using the three self-tapping screws removed in step
5, secure the left fog light on the front bumper.
FRONT
BUMPER
Y
19. Repeat steps 17 and 18 to install the right fog light.
AII 37566 (0709)
LEFT
FOG LIGHT
LEFT
FOG LIGHT
3 SELF-TAPPING
SCREWS
732013AY
5 of 10
732012CY
Advertisement
