Advertisement
10. Near the 1-pin connector, secure the fog light
harness to the vehicle harness with two wire ties.
VEHICLE
WIRE
HARNESS
TIES
FOG LIGHT
HARNESS
11. Attach the fog light harness ground terminal to the
vehicle panel using the ground bolt.
FOG LIGHT
HARNESS
TERMINAL GROUND
POINT
(Do not attach here.)
FOG LIGHT HARNESS
GROUND TERMINAL
4 of 10
FOG LIGHT
GREEN
HARNESS
TAPE
VEHICLE
HARNESS
RIGHT
HEADLIGHT
RIGHT
VEHICLE
HEADLIGHT
HARNESS
VEHICLE
PANEL
GROUND
BOLT
771017AB
12. On the driver's side of the vehicle, locate the vehicle
harness 1-pin connector. Plug the fog light harness
1-pin connector into the vehicle harness 1-pin
connector.
FOG LIGHT HARNESS
1-PIN CONNECTOR
13. Install one wire tie with clip to the fog light harness at
the green tape. Attach the wire tie with clip to the
hole in the vehicle frame.
WIRE TIE
772002AB
WITH CLIP
FOG LIGHT
HARNESS
VEHICLE FRAME
AII 37566 (0709)
LEFT
HEADLIGHT
VEHICLE HARNESS
1-PIN CONNECTOR
FOG LIGHT
HARNESS
GREEN
TAPE
FOG LIGHT
HARNESS
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
732004CY
LEFT
HEADLIGHT
732005BY
Advertisement
