Safety Guidelines - Edco SS-26 Series Operator's Instruction Manual

Self-propelled concrete/asphalt saw
Hide thumbs Also See for SS-26 Series:
Table of Contents

Advertisement

SS26-I-0415
Read and understand the Operator's Instruction Manual, the Rx for Concrete Saws,
Death or serious injury can result if this machine is used improperly.
Remove all rings, watches and jewelry prior to doing any work inside the console area.
Metallic jewelry could short out the positive lead on the battery or the hydraulic power unit and
cause severe bodily injury.
Maintain a safe operating distance from flammable materials. Sparks from the cutting-action of this saw can
ignite flammable materials or vapors.
Operator must wear appropriate clothing and footwear. Do not wear loose clothing or jewelry that can
get tangled or caught in moving parts.
Eye and ear protection must be worn at all times when this machine is in use. During normal use,
sound levels exceed 85dB. Use only ANSI approved safety glasses to help prevent eye injury. Nor-
mal, prescription eyeglasses have only impact resistant lenses; they are NOT safety glasses.
Keep a safe operating distance from other personnel and never leave the machine running unattended.
Maintain the machine in safe operating condition with all guards in place and secure, all mechanical fasteners
tight, all controls in working order and the saw configured for the job application.
The SS26 is both designed to cut flat, horizontal concrete or asphalt slabs using diamond saw blades.
The SS26 is to be operated by a single operator from a position at the rear of the saw.
Avoid deck inserts, pipes, columns, openings, electrical outlets, or any objects protruding from slab surface.
Inspect the blades carefully before installing. Do not use any questionable blade since serious personal injury
and/or damage to property can result.
Never operate this saw while under the influence of drugs, alcohol or when taking medications that impair the
senses or reactions, or when excessively tired or under stress.
Be sure all safety decals on the machine can be clearly read and understood. Replace damaged or missing
decals immediately.
Safety warnings and guidelines do not by themselves eliminate danger.
They are not given as substitutes for proper accident prevention and good judgement.
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Printed in USA
Fax (301) 663-1607 • 1-800-447-3326
©2015
Website: www.edcoinc.com • Email: sales@edcoinc.com
Page 4
and the Engine Manufacturer's Owner's Manual
before operating this equipment.

Safety Guidelines

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss-26e seriesSs26-35kSs26-15e

Table of Contents