3Disc FireCR Flash User Manual page 6

User Manual
FireCR Flash
Do not look inside of the device.
If any of the following conditions occur, unplug the device from the electrical outlet and contact
authorized service personnel.
The power cord or power adapter is damaged.
An object has fallen into the device.
The device has been exposed to water.
The device has been dropped or damaged.
The device does not operate correctly when the operating instructions are followed.
Intended Use
This device is a Computed Radiography System and intended for use in producing digital X-Ray
images for general radiography purposes.
imaging plate and workstation software. It scans X-Ray exposed image plate and produces X-
Ray image in digital form.
processing and routing. This device is intended to be operated in a radiological environment
by qualified staff.
FireCR Flash is not approved for the acquisition of mammographic image data.
It comprises of reader, cassette with reusable
Then, digital image is transferred to workstation for further
6
TM-401-EN