3Disc FireCR Flash User Manual page 12

User Manual
FireCR Flash
W
Use of Power Cord;
Type SJT or SVT, min. 18AWG, 3-Conductor, VW-1 125V, min 10A
(or 250V, 10A). Max 3.0m long; One end with Hospital Grade
Type, NEMA 5-15P for 125V or NEMA 6-15P for 250V. Other end
with appliance coupler. "CAUTION Grounding reliability can only
be achieved when the equipment is connected to an equipment
receptacle marked "Hospital Only" or "Hospital Grade".
For connection to supply not in USA, make sure the power cord is
the correct type that is required in your area.
W
Improper disposal of this product may result in environmental
contamination. When disposing of this equipment, contact 3D
Imaging & Simulations Corp.'s representative or related organs
of government. Do not dispose of any part of this equipment
without consulting a 3D Imaging & Simulations Corp.'s
representative first.
3D Imaging & Simulations Corp. does not assume any
responsibility for damage resulting from disposal of this equipment
without consulting 3D imaging & Simulations Corp.
W
Use the device passed IEC60950-1 or IEC60601-1 for the product
connected via USB port.
FireCR Flash CR Reader
ARNING
ARNING
ARNING
12
TM-401-EN
Power Cord