3Disc FireCR Flash User Manual page 45

User Manual
QuantorMed Plus
1.1.8. Step 7: Calibration!

The Calibration button is enabled after performing a successful Scan High Dose.

Click the Calibration button to generate calibration data. Calibration data is saved in
your local program folder.

After generation of calibration data, the calibration window closes automatically.
1.1.9. Step 8: Cancel

You can exit calibration window in the middle of process. This will abort your current
calibration process.
Figure 2.22. Calibration
9
TM -721-EN