3Disc FireCR Flash User Manual page 29

User Manual
FireCR Flash
Conducted RF 3 Vrms
IEC 61000-4-6 150 kHz to 80 MHz
Radiated RF 3 V/m
IEC 61000-4-3 80.0 MHz to 2.5 GHz
Note 1) Uт is the A.C. mains voltage prior to application of the test level.
Note 2) At 80 MHz and 800 MHz, the higher frequency range applies.
Note 3) These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
3 Vrms
Portable and mobile RF
150 kHz to 80 MHz
communications equipment
should be used no closer to
any part of the FireCR
system, including cables, than
the recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
3 V/m
80.0 MHz to 2.5 GHz
Where P is the maximum
output power rating of the
transmitter
according to the transmitter
manufacturer and d is the
recommended
distance in meters (m).
Field strengths from fixed RF
transmitters, as deter-mined by
an electromagnetic site survey,
(a) Should be less than the
compliance
frequency range (b).
Interference may occur in the
vicinity of
equipment marked with the
following symbol:
29
TM-401-EN
Flash
Recommended separation
distance
Recommended separation
distance
in watts (W)
separation
level in each