Table of Contents
Advertisement
Access Modular
Controller 2
Notice!
Device damage due to electrostatic discharge
Protect the hardware from electrostatic discharge, especially
when the device is opened. Always disconnect the controller
from the power source before modifying the installation. The
controller does not support hot-plugging.
Notice!
Unauthorized access
If the access modular controller is installed in an unprotected
environment, unauthorized people may be able to enter.
Install the controller in a location with restricted access.
Notice!
Device damage due to incorrect mounting
The controller can fall and break. Mount the controller on the
matching mounting rails.
This product is RoHS compliant. See Technical data for the full
table of hazardous components.
1.1
Unpacking
Check the packaging for visible damage. If anything has been
damaged during transport, please inform the transport agency.
Unpack the unit carefully. This is an electronic device that must
be handled with care to avoid damage. Do not attempt to put
the unit into operation if components are damaged.
If any parts are missing, inform your customer service
representative or a Bosch Security Systems salesperson. The
shipping carton is the safest transport container for the unit.
Store it and the other packaging material for future use. If the
unit has to be sent back, use the original packaging.
Bosch Security Systems B.V.
Safety | en
5
2019-11 | V02 |
Advertisement
Table of Contents
