Restoring The Original Functions Of Your Remote Control; Troubleshooting - Philips SRU 520/87 Instructions For Use Manual

Philips universal remote control 2in1 for tv and vcr/dvd
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SRU520_87_v6.qxd
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the SRU520
pressed simultaneously for three seconds,
until the mode key (TV or DVD/VCR) flashes
twice and then remains lit.
2
Press keys 9, 8 and 1 in that order.
The mode key (TV or DVD/VCR) key flashes
twice. All original functions have now been
restored and any extra functions have been
deleted.

5. Troubleshooting

Problem
Solution
The mode keys (TV and DVD/VCR) blink four times after every key press.
The remote control is indicating that its batteries are running low. Replace the old
batteries with two new 1.5 Volt, AAA batteries.
The device you want to operate does not respond and the mode key
(TV or DVD/VCR) does not flash when you press a key.
Replace the old batteries with two new 1.5 Volt, AAA batteries.
The device you want to operate does not respond but the mode key
(TV or DVD/VCR) does flash when a key is pressed.
Point the SRU520 at the device and make sure that there are no
obstructions between the SRU520 and the device.
The SRU520 does not respond properly to commands.
Maybe you are using the wrong code. Try programming the SRU520 again
using another code, which is mentioned under the brand of your device, or
reset for automatic search to find the right code.
If the device still does not respond, call our helpline.
The Teletext keys do not work.
Find out whether your TV is equipped with Teletext.
You have difficulties operating all of the functions on your device.
Maybe the SRU520 has to be adapted to the model of the device.
Call our helpline for details.
Your brand of device is not in the code list.
Try to set the SRU520 automatically.
See 'Automatically setting the remote control'.
None of the codes works during manual setting of the remote control.
If that is the case, follow the instructions under
'Automatically setting the remote control'.
26-04-2005
14:38
Pagina 9
Instructions for use
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sru 520

Table of Contents