Table of Contents
Advertisement
1
6
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed.
WARNING:
(OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER.
CAUTION:
WARNING:
BE INHALED.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Make sure the collection tank is empty before using as a blower. Clear all dirt and debris from
the hose and collection tank.
3. Remove hose from the vacuum port.
4. Secure the larger end of the hose into the blower port on the back of the power head (Fig. 2).
5. Fit the desired attachment onto the hose or extension wand (Fig. 3).
6. Verify that the on/off switch is in the 'O' OFF position before plugging the power cord into the
outlet (Fig. 4 & 5).
7. Before turning ON the vacuum, firmly hold the loose end of the hose. Turn the motor on by
flipping the switch to the 'I' ON position (Fig. 6).
8. Once you have completed blowing, flip the on/off switch to the 'O' (OFF) position and unplug
the power cord from the outlet (Fig. 7).
BLOWER OPERATION
2
7
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
4
3
10
5
Advertisement
Table of Contents
