RIGOL
General Safety Summary
CAUTION
This device is designed to comply with IEC 61010 Safety Standards, and has
been thoroughly tested for safety prior to shipment. However, mishandling
during use could result in injury or death, as well as damage to the device. Be
certain that you understand the instructions and precautions in the manual
before use.
Safety Terms and Symbols
Before using the device, be sure to carefully read the following safety notes.
The following symbols in this manual indicate the relative importance of
cautions and warnings.
DANGER
WARNING
CAUTION
NOTE
II
The
symbol printed on the device indicates that the
user should refer to a corresponding topic in the manual
(marked with the
function.
In the manual, the
important information that the user should read before
using the device.
The
symbol printed on the device indicates that
only insulated conductors suited to the voltage of the
circuit under test can be measured.
Indicates that incorrect operation presents an extreme
hazard that could result in serious injury or death to the
user.
Indicates that incorrect operation presents a significant
hazard that could result in serious injury or death to the
user.
Indicates that incorrect operation presents a possibility
of injury to the user or damage to the device.
Indicates advisory items related to performance or
correct operation of the device.
symbol) before using the relevant
symbol indicates particularly
RP1003C/RP1004C/RP1005C User's Guide